Analysis of common problems of paper Bag Stringing Machine
What should we do when we encounter a problem when we encounter a paper Bag Stringing Machine opportunity? If it's just a few minor problems, it must be solved by yourself. Finding maintenance personnel for minor problems will not only waste time and affect efficiency, but also increase costs. When you encounter some big problems, you just wait for the maintenance staff. Therefore, our operators will properly learn about the failure analysis of the paper Bag Stringing Machine. Next, we will simply understand the fault and analyze it.
The stepper motor does not drag the material
1. Check whether the power supply voltage is normal, and the voltage of the paper Bag Stringing Machine is too high or too low, and the servo amplifier is in the protection state.
2. The fuse of the servo amplifier is not broken.
3. Whether the plug of the servo amplifier is inserted firmly.
4. Whether the Hall signal of the microcomputer is normal.
The dragging time is short and long
1. Whether the timing belt connected between the stepping motor and the drive rubber roller is loose.
2. Whether the pressure of the rubber roller of the paper Bag Stringing Machine is too small.
3. The discharge is too heavy or the discharge is out of sync with the host.
Feeding and receiving does not transfer or is abnormal
1. Whether the feeding and receiving speed control board is damaged.
2. Whether the fuse of the speed control board is broken.
3. The motor carbon brush is in poor contact.
4. The speed regulating potentiometer is broken or the contact is not good.
5. Whether the motor is damaged.
The electric heater does not heat or the temperature control fails
1. The heater of the stringing bag making machine is damaged.
2. The thermocouple connection of the paper Bag Stringing Machine is not firm.
3. Triac or solid state relay breakdown.
When encountering a machine failure, you should immediately stop the operation and report it in time, and maintain the faulty part in the first time. If it is a major failure, wait for the arrival of the maintenance clerk, and do not repair without authorization, so as to avoid secondary failures of the paper Bag Stringing Machine.
In addition, before and after the operation of the machine, the machine must be cleaned and cleaned. It is necessary to check the machine regularly to find out and solve it early.
